Help identify a part

suspect86

Active Hunter
Anyone know what sort of pieces were used for the ROTJ gauntlet flame thrower? (left hand)
I've been through Menards and Home Depot looking for something close and I'm just not happy with what I've found.

Any tips would be much appreciated.
S86

_-.jpg
 
somewhere on there there's a thread that suggests coaxial cable ends. i forget the size, but if you go to radio shack and look at the crimp on coax connectors you should find something decent.
 
Isn't it some coax connector?

"I also recommend replacing the flamethrower nozzels (on left gauntlet) with Radio Shack's 'Premium PL-259 UHF-Type Coaxial Connectors'" - TK-409
 
I'm also using Radio Shack's "Premium PL-259 UHF-Type Coaxial Connectors". I saw TK-409 and Bobamaker used them for their flamethrower nozzles. They look close enough and the price is right... considering you get 2 in a pack.
 
This thread is more than 15 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top