Page 1 of 3 123 LastLast

Hasbro's Fett Blaster

  1. #1
    WhiteShadow's Avatar
    Member Since
    Jan 2009
    From
    Atlanta, GA
    Posts
    36

    Hasbro's Fett Blaster

    So I was poking around the SW official site and noticed that Hasbro's posted pics of the years upcoming SW toys. Most have probably seen the voice changing Fett Helmet (which I will purchase and immediately gut for the electronics)...but they also have a pic of the Fett ROTJ Blaster. I would need to see it to scale (total shame if it's "kid sized") but some paint and weathering could make this a decent piece for trooping...
    hasbro_fett_blaster-jpg

  2. #2
    formerly slave1117a vaders right hand's Avatar
    Member Since
    Nov 2002
    From
    Hoth wisconsin
    Posts
    462

    Re: Hasbro's Fett Blaster

    hope its adult size that will look good on the wall as well .

  3. #3

    Re: Hasbro's Fett Blaster

    It's tiny. Looks to be about as scaled down as the Hasbro DC-15s.

    Here's the new EE-3 next to Hasbro's Deece:



    And here's Hasbro's Deece next to an accurately-scaled one:



    --Jonah

  4. #4
    dsonik1's Avatar
    Member Since
    Oct 2009
    From
    Pocatello, Idaho
    Posts
    1,492

    Re: Hasbro's Fett Blaster

    That will, however, once painted be perfect for my sons mini ROTJ Boba. Thanks for the pics bruv! Have they got a release date, yet?

  5. #5
    Muad'Dib's Avatar
    Member Since
    Jun 2003
    From
    Cookeville, TN
    Posts
    1,289

    Re: Hasbro's Fett Blaster

    I still say cut the stock off and it'd make a perfect pistol version for all the custom Mando's out there.

  6. #6
    jebby10's Avatar
    Member Since
    Oct 2009
    From
    san antonio, texas
    Posts
    103

    Re: Hasbro's Fett Blaster

    looks like if you paint it and add a bigger stock you would be good to go.

  7. #7
    High Speed Low Drag Fett 4 Real's Avatar
    Member Since
    Jan 2010
    From
    USAF Utah
    Posts
    4,968

    Re: Hasbro's Fett Blaster

    jebby10 said: View Post
    looks like if you paint it and add a bigger stock you would be good to go.
    You know looking at the measurements on TK409s website and looking at the toy...You appear to be correct! The stock is the only thing thats to short...If the pistol part is to scale the whole gun part is correct...the stock would be about 1.5-2 inches to short which woodman makes stocks i hear

  8. #8
    formerly Woodman woodman's Avatar
    Member Since
    Dec 2008
    From
    LR,Arkansas
    Posts
    1,305

    Re: Hasbro's Fett Blaster

    Thanks for the plug have a safe trip.

  9. #9
    High Speed Low Drag Fett 4 Real's Avatar
    Member Since
    Jan 2010
    From
    USAF Utah
    Posts
    4,968

    Re: Hasbro's Fett Blaster

    Are you confusing me and fett4real again?

  10. #10
    dsonik1's Avatar
    Member Since
    Oct 2009
    From
    Pocatello, Idaho
    Posts
    1,492

    Re: Hasbro's Fett Blaster

    No, your status still says your headed to Okinawa... lol

  11. #11

    Re: Hasbro's Fett Blaster

    I've seen a release date of 01 August for the helmet. I think the blaster should be the same time...

    --Jonah

  12. #12
    BH Reaper's Avatar
    Member Since
    Jul 2008
    From
    Australia
    Posts
    308

    Re: Hasbro's Fett Blaster

    That blaster will also suit my sons Fett very nicely. I haven't heard about the Fett bucket for kids here yet? Will the electronics be worth it?

  13. #13
    High Speed Low Drag Fett 4 Real's Avatar
    Member Since
    Jan 2010
    From
    USAF Utah
    Posts
    4,968

    Re: Hasbro's Fett Blaster

    dsonik1 said: View Post
    No, your status still says your headed to Okinawa... lol
    Headed there when Im done here...Not soon enough though

  14. #14
    elusivesolution's Avatar
    Member Since
    Apr 2010
    From
    Westminster, MD
    Posts
    126

    Re: Hasbro's Fett Blaster

    The barrel looks to be a bit short. I wonder if it's the right diameter. This could possibly turn out to be very modifiable.

  15. #15
    batmann539's Avatar
    Member Since
    May 2010
    From
    Sacramento, CA
    Posts
    222

    Re: Hasbro's Fett Blaster

    I too will be picking this up for my sons BF outfit.

    Sean

  16. #16

    Re: Hasbro's Fett Blaster

    Im gonna pick a couple of these up on release just to see if I can customise them into a suitable EE-3 for my kit. Worst case scenario Im out $40 best case Ive saved $200.

  17. #17
    elusivesolution's Avatar
    Member Since
    Apr 2010
    From
    Westminster, MD
    Posts
    126

    Re: Hasbro's Fett Blaster

    Rictus said: View Post
    Im gonna pick a couple of these up on release just to see if I can customise them into a suitable EE-3 for my kit. Worst case scenario Im out $40 best case Ive saved $200.
    That's exactly what I'm thinking

  18. #18

    Re: Hasbro's Fett Blaster

    I ordered two of them from BBTS, and I am waiting for them to arrive in Taiwan. According to the measurement of the package found on-line, I believe this Hasbro Boba Fett blaster is overall 6" shorter than the actual prop. I think the barrel section is one inch shorter, grip section is also one inch shorter, and the stock is about 4 inches shorter, so basically if you can get the stock replaced, then this toy blaster should be a good alternative. Aside from being a little shorter than SA, the best thing for Hasbro Fett blaster is that you can add your own electronic inside.

    Azuma

  19. #19
    Saturniid19's Avatar
    Member Since
    Sep 2005
    From
    Omaha, NE
    Posts
    125

    Re: Hasbro's Fett Blaster

    Picked one of these up today, here's a pic:



    It's about 24 inches long. Since I don't have a nice one to compare with (that's why I bought it in the first place), there's an 18" ruler, scope and metal bracket for comparison. I think six inches short is about right, as azuma said.

    I plan on cleaning it up and painting it, maybe selling it later to help fund a bigger gun. The sound is nice and loud, unlike the voice changer helmet which I also saw at TRU. It's perfect for a kid, and about as accurate as you could expect from one of these things.

  20. #20

    Re: Hasbro's Fett Blaster

    As soon as I can get my hands on one of the toy guns I'll post pics of it next to my Sidewinder.

  21. #21
    Account Deactivated
    Member Since
    Apr 2004
    Posts
    3,530

    Re: Hasbro's Fett Blaster

    Saw one at SDCC
    seems way too wee.
    My hyperFirm dwarfs it.

  22. #22
    dsonik1's Avatar
    Member Since
    Oct 2009
    From
    Pocatello, Idaho
    Posts
    1,492

    Re: Hasbro's Fett Blaster

    I ordered one for my son's Boba yesterday. Should be in beginning of next week. I'll take pics of it with my MR.

  23. #23
    darth z's Avatar
    Member Since
    Oct 2009
    From
    shanghai, china
    Posts
    345

    Re: Hasbro's Fett Blaster

    yes, i also bought one for my son he will be able to use it 5 years later for his mini-boba lol

  24. #24

    Re: Hasbro's Fett Blaster

    just got both of these tonite, helmet actually fits me. i couldnt beleive it.

  25. #25
    dsonik1's Avatar
    Member Since
    Oct 2009
    From
    Pocatello, Idaho
    Posts
    1,492

    Re: Hasbro's Fett Blaster

    Yeah, those SW kids helmets sizes are a bit ignorant... Not sure where they're finding these Lemon headed monkey children, they are basing their sizes off of.... lol

Similar Threads

  1. Question: Hasbro Boba Fett Blaster?
    By clonecollector in forum The Sarlacc Pit
    Replies: 3
    Last Post: Feb 16, 2010, 6:13 PM
  2. Another Hasbro Conversion
    By bad_transmitter82 in forum Star Wars Costumes
    Replies: 6
    Last Post: Jul 22, 2009, 7:43 PM
  3. Replies: 10
    Last Post: Oct 26, 2005, 5:06 AM
  4. finished my first Fett piece for my Fett v2.0 (ROJ blaster)
    By Dustin Crops Boy in forum Boba Fett Costume
    Replies: 18
    Last Post: Jul 9, 2004, 2:32 PM
  5. Exhibit Boba Fett blaster = screen used blaster?
    By kurtyboy in forum Boba Fett Costume
    Replies: 1
    Last Post: Feb 27, 2004, 9:08 AM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •