Printable View
I found a local supplier of girth belts, however i don't know which size to get, i'm around a 34"inch waist but i'm thinking
i don't buy a size 34"inch from buckle end to buckle end. taking into consideration flight suit, cod and butt armor will add extra
dimension, plus the straps that secure around the rear witch i will be adding ,Would like to hear from you guys who are same waist size as me, and what size girth belt you got?
You are going to want a bit of a gap in the back between the buckles. Also if you buy a 34 inch girth from a Horse and tack place the actual length is going to be about 32. The reason for this is that the original design of the belt is to be used with a saddle. The other two inches would be taken up by the leather belt portion of the saddle.
If the belt measures 34 tip to tip, then it would probably be listed as a 36, and if your waist is a 34 it would probably work fine for you.
Boba Fett Empire Strikes Back Costume - The Dented Helmet Gallery
See the gap between the buckles in this pic. The nylon straps will give you some more length to make it around the clothes and armor.
So I say all of that to say a 34 should work.
Thanks Mullreel, excellent, anybody else got a 34" waist? what length belts you guys got?
Hi , where did you find a girth belt, in from the uk and can't find any from our side of the pond on the Internet, I'm also a 32/34 waist
Cheers , cliff
Hi cliff, i found local saddlery close to me that does them, but you being in the UK you can get them here
https://www.stubbendirect.co.uk/stub...rth-p-195.html
Cheers for the link, pity they don't come in our size :-(
Plus nylon won't take dye , the search goes on
Thanks again, cliff
Victory Canter English Tack & Apparel - Horse Tack - Girths - Synthetic/Comfort - Non Slip Mohair Girth
Here is a link to an accurate girth belt. They show at the top of the page that they ship internationally.
if you call them they may have sizes that are not listed........I had to ask for the size I needed.
I plan to paint mine , recon the 30"/75cm dressage length would do because of the nylon straps.The dye often rubs off on the jumpsuit, so painting might be the way to go with that nylon type?
That's a good point , forgot about the straps ,dohh
Cheers for the link Mullreel
After reading some of the responses I'm realizing that my girth is too large. When I bought it, it kind of fit but due to my job (I'm a mailman) I have lost quite a bit of weight and unfortunately my waistline. My question is this: Is is possible to modify the length without ruining it? Or does it just make more sense to just buy a new one? In case the question is asked there is no gap between the buckles. Thanks for any info provided.
Doug
buy a new one they are not that expensive....
That's what I thought but I figured I'd ask the question anyway. Just so I'm on the right page I'm probably a 32-34 inch waist so what size do I ask for? 32 or 34? I'm going to go with the victory canter link from above and get the white and then dye it to the desired color.
Doug
This is the one I ordered in Natural, I have a 33" waist and ordered the 34 thinking that the armor and clothing layers will add enough to keep the buckles from touching.
I can mod it fairly easily if they touch. :)
Just FYI, with my 33" waist, the 34" buckles are about 3" apart.
Hope that helps.