girth belt
- Thread starter teabo
- Start date
Hi Teabo,
I suggest you add another two inches to your waist size, so a size 44" girth belt will probably be best. Below is a picture of mine at size 34" which I should've gotten a size 36" for a better fit. The gap should be about 5" inches in between the buckles. Hope this helps!
-Gene
I suggest you add another two inches to your waist size, so a size 44" girth belt will probably be best. Below is a picture of mine at size 34" which I should've gotten a size 36" for a better fit. The gap should be about 5" inches in between the buckles. Hope this helps!
-Gene
Seven
Well-Known Hunter
The measurement of the Girth itself is from each end of the buckles. You need about a 4-5" gap between the buckles for the nylon straps.
Example: say if your waist measures 40" around, then you would subtract 4" to get 36", so you could go with a 36" girth. If you subtract 5", you get 35, since there is no 35" girth, you would round up to 36".
Hope that makes sense. As far as being a 42" waist, I would go with the 38" girth.
Example: say if your waist measures 40" around, then you would subtract 4" to get 36", so you could go with a 36" girth. If you subtract 5", you get 35, since there is no 35" girth, you would round up to 36".
Hope that makes sense. As far as being a 42" waist, I would go with the 38" girth.
Fettenstein01
Hunter
Hey there. I'm slowly getting things together for my ROTJ Boba costume.
I was going to purchase a girth belt but I'm not sure what size I need to get. The waist in my jeans is 34", so what size of girth belt should I get?
I was going to purchase a girth belt but I'm not sure what size I need to get. The waist in my jeans is 34", so what size of girth belt should I get?
Fettenstein01
Hunter
Anyone know?
Mando Assassin
New Hunter
well i guess if u need a gap of around 5 " between the buckles and u r 34" around the waist then you would need a 29"-30" so it looks right get some rope and see where the ends come to at that length before u spend the money remember thats where the buckles should end on each side
Bubba Fett
Well-Known Hunter
I think you really need to measure your waist with the jumpsuit and codpiece on to be accurate.
Fettenstein01
Hunter
Now I'm totally confused.
I actually read another thread that said you don't measure at the waist. You measure around the hips. I believe that's where the girth belt is suppose to sit.
For example: I measured and came up with 40", so with the 4 or 5" subtracted I'll need a 35" or 36" inch belt. Since these belts only come in 2" increments (30", 32", 34", 36"...), I figured a 36" belt would be fine.
Then I read another thread that said if you order... let's say a 36" belt, the actual size will be 2" shorter. So 36" is now 34".:confused Then you have to think "will it shrink when I dye it... even if I stretch it on a board to dry?"
I think I need a 38" belt. Does this make any sense?:rolleyes
I actually read another thread that said you don't measure at the waist. You measure around the hips. I believe that's where the girth belt is suppose to sit.
For example: I measured and came up with 40", so with the 4 or 5" subtracted I'll need a 35" or 36" inch belt. Since these belts only come in 2" increments (30", 32", 34", 36"...), I figured a 36" belt would be fine.
Then I read another thread that said if you order... let's say a 36" belt, the actual size will be 2" shorter. So 36" is now 34".:confused Then you have to think "will it shrink when I dye it... even if I stretch it on a board to dry?"
I think I need a 38" belt. Does this make any sense?:rolleyes
Fettenstein01
Hunter
Before I resort to an online purchase, I think I'll go check out the local tack shops. That way I can try it on... and confuse the store employees.
