Gauntlet blueprints

  1. #126
    t_bone9600's Avatar
    Member Since
    Dec 2005
    From
    Jackson, Ohio
    Posts
    855

    Re: Gauntlet blueprints

    As always these look great, Alan. Fantastic Work! One day I'll attempt to make them. I've used your templates for almost everything else might as well give these a try too.

    -Troy

  2. #127
    Mojo-Fett's Avatar
    Member Since
    May 2007
    From
    UK
    Posts
    4,783

    Re: Gauntlet blueprints

    Hey Chewie... where is the update on your gauntlets? look forward too seeing your pics buddy.

  3. #128
    Ronin677's Avatar
    Member Since
    Oct 2005
    From
    Norwich UK
    Posts
    1,903

    Re: Gauntlet blueprints

    those are just insane. Well done guys

  4. #129

    Re: Gauntlet blueprints

    WOW!! Iím gone a week and you guys go crazy! Looks like there are a number of great builds going on and even one in metal, very cool! great job guys. Canít wait to see the finished projects.

    Glad to see that folks likes them.

    As for the rocket cradle I have to agree with MOJO-Fett this is one piece that is better off being a cut to fit part, but if folks insist I will make exact flat pattern. The other part is still in work, I didnít want it hold up the release of the templates. It is also a part that should be easy to take some scrap and cut to fit. I have started a flat pattern for it, but just havenít had the time to finish it.

    Alan

  5. #130
    chewiepal's Avatar
    Member Since
    May 2005
    From
    VALLADOLID-SPAIN
    Posts
    276

    Re: Gauntlet blueprints

    Hi, I was bussy, but now (today, to be exactly) I have start with this project....so here you have after 2 ours, my firt advance....
    MOJO-FETT/ WIZARD OF FLIGHT thanks again!!!!


    PVC RULES!!!!!! (only because here in Spain there is no sintra )

  6. #131

    Re: Gauntlet blueprints

    Cardboard gauntlets here I come! Thanks guys!!

  7. #132
    chewiepal's Avatar
    Member Since
    May 2005
    From
    VALLADOLID-SPAIN
    Posts
    276

    Re: Gauntlet blueprints

    here some progress...!!
    maybe today I`ll finish the righ gauntlet, in the basics forms, later will smoth it with some bondo...let's see whats come out!



    Last edited by chewiepal; Jul 26, 2007 at 1:00 PM.

  8. #133
    Mojo-Fett's Avatar
    Member Since
    May 2007
    From
    UK
    Posts
    4,783

    Re: Gauntlet blueprints

    Looks great CP...
    Keep it up, you'll have some paint on them soon.... 8)

  9. #134
    chewiepal's Avatar
    Member Since
    May 2005
    From
    VALLADOLID-SPAIN
    Posts
    276

    Re: Gauntlet blueprints

    thanks! tomorrow will take some pics... I have work A LOT on them today, and almost have finished the right one...

  10. #135
    dung0beetle's Avatar
    Member Since
    Oct 2006
    From
    Texas
    Posts
    306

    Re: Gauntlet blueprints

    Is there a flat pattern for the gauntlet missile? I was hoping to make it out of cardstock.

  11. #136
    chewiepal's Avatar
    Member Since
    May 2005
    From
    VALLADOLID-SPAIN
    Posts
    276

    Re: Gauntlet blueprints

    jeje, here are the last pics...tomorrow will start the left one, and have to find those swiches....


    my camera dies!!!!! (just the batteries ) but I have allready paint it in green...!!still have some more to do with the paint....

    see ya...thnx again!!
    Last edited by chewiepal; Jul 30, 2007 at 4:40 PM.

  12. #137
    Kashyyyk4ABY's Avatar
    Member Since
    Jun 2007
    From
    Mansfield, TX
    Posts
    356

    Re: Gauntlet blueprints

    Dang..those look awesome!

  13. #138
    chewiepal's Avatar
    Member Since
    May 2005
    From
    VALLADOLID-SPAIN
    Posts
    276

    Re: Gauntlet blueprints

    thanks kashyyyk!!! nothing of this could be posible without the help of WOF and MOJO-FETT...

  14. #139
    Kashyyyk4ABY's Avatar
    Member Since
    Jun 2007
    From
    Mansfield, TX
    Posts
    356

    Re: Gauntlet blueprints

    I finished this little puppy in about four hours today. I built it out of an old metal "Beware of Dog" sign and thin cardboard. The clamshells are shut with velcro and open with a hinge that is attached with brads, because the screws were WAY too long. I'll more pictures tomorrow after I spackle and paint it. And I just realized that I left that little box on the top off...so I'll have to do that.


  15. #140
    I helped at SDCC '08 GCNgamer128's Avatar
    Member Since
    Jan 2006
    From
    Las Vegas, Nevada USA
    Posts
    5,520

    Re: Gauntlet blueprints

    chewiepal said: View Post
    jeje, here are the last pics...tomorrow will start the left one, and have to find those swiches....


    my camera dies!!!!! (just the batteries ) but I have allready paint it in green...!!still have some more to do with the paint....

    see ya...thnx again!!
    Wow, those are looking fantastic!

  16. #141
    chewiepal's Avatar
    Member Since
    May 2005
    From
    VALLADOLID-SPAIN
    Posts
    276

    Re: Gauntlet blueprints

    kashyyyl, well done job!!!
    this is my fav...

    today I have started with the rigth one, it's more trickie, at least working with pvc...tomorrow more advances...
    bye!

  17. #142
    Kashyyyk4ABY's Avatar
    Member Since
    Jun 2007
    From
    Mansfield, TX
    Posts
    356

    Re: Gauntlet blueprints

    WOW!!!!!! Egats..thats amazing!!

  18. #143
    I helped at SDCC '08 GCNgamer128's Avatar
    Member Since
    Jan 2006
    From
    Las Vegas, Nevada USA
    Posts
    5,520

    Re: Gauntlet blueprints

    Mojo-Fett said: View Post
    I've completed the MK2 version of the lower clamshells... and managed to un-stick my fingers!
    After Alan and I chatted about some areas that needed some minor adjustments on thickness etc, the final set of templates were born...
    I'm really happy with them - especially the way they form around the arms.
    Next I'm gonna try and mould the lower left clam and add the upper section to the right...
    What thickness of plastic did you use?

  19. #144
    Mojo-Fett's Avatar
    Member Since
    May 2007
    From
    UK
    Posts
    4,783

    Re: Gauntlet blueprints

    Hey guys...
    I go away for a couple of days and you guys are doing some great work with those Gauntlets...CP Wow!! nice work there my freind....

    CGN... I used 1mm Foamex board and layered it with the inner and outer halves, then included another 'rim' to give the clams further depth? Hope that helps? or I can send ya some pics if ya want?

    Kash... I cannot see your pic?

    Gav

  20. #145
    chewiepal's Avatar
    Member Since
    May 2005
    From
    VALLADOLID-SPAIN
    Posts
    276

    Re: Gauntlet blueprints

    well, thinking that I have enough with this gauntlet!!! NOOO, I WANT IT ALL!!!
    jejeje...here more progress, incluided darts from my own recipe...



  21. #146
    dung0beetle's Avatar
    Member Since
    Oct 2006
    From
    Texas
    Posts
    306

    Re: Gauntlet blueprints

    chewiepal said: View Post
    well, thinking that I have enough with this gauntlet!!! NOOO, I WANT IT ALL!!!
    jejeje...here more progress, incluided darts from my own recipe...


    ...so, what's the recipe?...

  22. #147
    Tazman's Avatar
    Member Since
    May 2007
    From
    Iserlohn, Germany
    Posts
    80

    Re: Gauntlet blueprints

    @ dung0beetle:

    Please look here:

    http://www.thedentedhelmet.com/showthread.php?t=20532

    Thomas

  23. #148
    chewiepal's Avatar
    Member Since
    May 2005
    From
    VALLADOLID-SPAIN
    Posts
    276

    Re: Gauntlet blueprints

    sorry dungObeetle...I don't see your reply...I don't make the link, cause I think that people will look my other thread...
    thanks Tazman for the help!!!!
    right now I'm working in the other gaunt...soon I will have something to post..

  24. #149
    Mojo-Fett's Avatar
    Member Since
    May 2007
    From
    UK
    Posts
    4,783

    Re: Gauntlet blueprints

    Cool...
    CP look forward to seeing your progress on these gauntlets...
    good work.

  25. #150
    Kashyyyk4ABY's Avatar
    Member Since
    Jun 2007
    From
    Mansfield, TX
    Posts
    356

    Re: Gauntlet blueprints

    CP, the paint looks GREAT! I'll have some photos up of my finished build (no paint ) today after I get back from band camp.

Similar Threads

  1. Jango Gauntlet Blueprints
    By wizardofflight in forum Jango Fett Costume
    Replies: 69
    Last Post: Sep 24, 2013, 2:48 PM
  2. Need blueprints
    By Jaing in forum Boba Fett Costume
    Replies: 1
    Last Post: Apr 2, 2010, 12:10 PM
  3. Left Gauntlet Darts Blueprints
    By Seven in forum Boba Fett Costume
    Replies: 1
    Last Post: Feb 9, 2009, 9:24 PM
  4. Gauntlet Blueprints?
    By BelaLugosi in forum Boba Fett Costume
    Replies: 9
    Last Post: Oct 25, 2006, 8:20 PM
  5. Where are Wizards RF blueprints?
    By mandalore697 in forum Boba Fett Helmet
    Replies: 4
    Last Post: May 4, 2006, 10:25 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •