Subscribe
  1. Member Since
    Apr 2002
    Posts
    215
    Aug 4, 2003, 10:42 AM - FettLights #1

    Hey all, long time no post.

    I normally don't "advertise" my circuits. If someone wants them, I'm always open to e-mails or PMs. However, there was a high demand for them a while back (so I ordered several boards), and only a few sold. Now I have about 1 dozen spare boards available.

    So the point is, I have two sets of FettLights built-up and nearly completed. All they lack are two parts for each, which I'll have to order, and as some of you know, I don't have the funds to front more parts on these at the moment. So ... if anyone is wanting a set of FettLights now, please let me know ASAP. Once I receive payment (even on one set), I'll order the needed parts and ship out the lights within a week (barring any delays on parts shipment, which is rare).

    Again, this isn't like a push to sell the lights. I'll post this on the RPF as well, so I'm sure they'll go. I have two other projects coming up by next week (most likely), so this is just my attempt at recouping money I've already spent, and promising a quick turn-around before things get a little busier.

    Thanks for looking,

    ATM
    ShackMan
  2. Defiler's Avatar
    Member Since
    Nov 2002
    Posts
    1,092
    Aug 4, 2003, 8:32 PM - Re: FettLights #2

    PM sent.
  3. Jango's kid's Avatar
    Member Since
    Nov 2002
    Posts
    2,517
    Aug 4, 2003, 9:43 PM - Re: FettLights #3

    PM sent.
  4. Soundwave2000
    Guest
    Aug 14, 2003, 1:26 AM - Re: FettLights #4

    I purchased a set of shackman's lights last year, they are awesome! They will really make your costume stand out. If I new how to post pics on here I would. Last Halloween I must of had 100 compliments on how cool the lights are. The best was from a Hooters girl, nice!
  5. Community Founder Art Andrews's Avatar
    Member Since
    Feb 2002
    Posts
    8,199
    Aug 14, 2003, 11:47 PM - Re: FettLights #5

    Yup! Shack's lights RULE! You can find out a bit more about them here:

    http://www.thedentedhelmet.com/bbt/e..._animation.htm
  6. Member Since
    Apr 2002
    Posts
    215
    Aug 15, 2003, 8:26 AM - Re: FettLights #6


    Brak's Buddy wrote:

    Yup! Shack's lights RULE! You can find out a bit more about them here:

    http://www.thedentedhelmet.com/bbt/e..._animation.htm
    Thanks Braks.

    I *just* got an e-mail from one of my suppliers yesterday, that my parts are shipping (been on back-order for weeks). I have maybe a dozen or so FettLight boards left if anyone needs/wants them soon.

    After these are gone, my circiut may die off. Someone else was offering up the same circuit recently at a cheaper price, so there'd be no point in me ordering more boards. This isn't a push for sales (I hate that myself) ... I have the boards on-hand and can keep them as long as needed. I'm just saying that when they're gone, they may be gone (depends on the other person's runs I guess).

    For those of you with other prop interests (Vader, R2, BTTF), I do have other ventures in the works ...

    Thanks,

    ATM
    ShackMan
  7. FettinProgress
    Guest
    Aug 16, 2003, 10:28 AM - Re: FettLights #7

    PM Sent
  8. natty15d's Avatar
    Member Since
    Feb 2002
    Posts
    262
    Aug 18, 2003, 3:45 AM - Re: FettLights #8

    I have a set of these lights & they are THE BEST!

    Nathan
  9. Sleezy's Avatar
    Member Since
    Jun 2003
    Posts
    439
    Aug 20, 2003, 6:39 PM - Re: FettLights #9

    PM sent.
  10. rdpmackie
    Guest
    Aug 21, 2003, 5:45 AM - Re: FettLights #10

    In the open and sharing spirit of TDH...
    How 'bout a tutorial (brief or detailed) on how to wire these lights ourselves? I, and many others, are in the position that if we don't make it ourselves, it will never happen. But sell the ones you have first...them make the tutorial
  11. Member Since
    Apr 2002
    Posts
    215
    Aug 21, 2003, 1:49 PM - Re: FettLights #11


    rdpmackie wrote:

    In the open and sharing spirit of TDH...
    How 'bout a tutorial (brief or detailed) on how to wire these lights ourselves? I, and many others, are in the position that if we don't make it ourselves, it will never happen. But sell the ones you have first...them make the tutorial
    I'm assuming you haven't been on-board with TDH TOO long, so welcome to the group. No, that wasn't totally sarcastic. If you'll check out Brak's Buddy's tutorial site, the schematic for my lights has been available for almost two years now.

    http://www.thedentedhelmet.com/bbt/e..._animation.htm

    For anyone that's electronically inclined, I'd be happy for you to build your own, and will answre any questions you may have as time permits (I'm currently dpong what I can do bring in an income, not leaving me much "free-time"). And if you can assemble the circuit, but don't want to invest in a PIC programmer or the time to create your own code to operate it, I can sell just the programmed micro.

    Good luck,

    ATM
    ShackMan

    wild_wire@yahoo.com
  12. rdpmackie
    Guest
    Aug 23, 2003, 10:22 AM - Re: FettLights #12

    Thanks man.

    I didn't realize that those were yours...I came across them quite a while ago but forgot where I had seen them. In the open and sharing spirit of TDH, thanks for making those available!

    Now I just have to figure out how to use them!

    Thanks for wishing me luck...I'll need it!!
  13. Member Since
    Aug 2003
    Posts
    68
    Aug 23, 2003, 11:19 PM - Re: FettLights #13

    Hi

    PM sent

    Richard
  14. Member Since
    Apr 2002
    Posts
    215
    Aug 24, 2003, 1:42 PM - Re: FettLights #14

    No problem Robert. Good luck (again), and if it doesn't work out the way you want, and you collect other props, I may be open to possible trades (once I get an income again).

    PM returned, Richard.

    ATM
    ShackMan
  15. Jango's kid's Avatar
    Member Since
    Nov 2002
    Posts
    2,517
    Aug 25, 2003, 5:35 PM - Re: FettLights #15

    I recieved my set today, & they far exceeded my expectations. Well worth every cent!!!Thanx Shackman
    Damian
  16. Member Since
    Aug 2003
    Posts
    96
    Aug 29, 2003, 7:11 PM - Re: FettLights #16

    PM sent
  17. Lynn TXP 0369's Avatar
    Member Since
    Mar 2002
    Posts
    1,785
    Oct 12, 2003, 4:18 PM - Re: FettLights #17

    Shackman..
    Just wondering if these are still available?

    Lynn
  18. bh-7603's Avatar
    Member Since
    Apr 2003
    Posts
    812
    Oct 13, 2003, 12:08 PM - Re: FettLights #18

    i love my shackman lights!
  19. Member Since
    Apr 2002
    Posts
    215
    Oct 13, 2003, 12:10 PM - Re: FettLights #19

    Thanks for the endorsement, Jason.

    Lynn, yes, they're still available. Interest died-down after my last order of PC boards, so I have a few left. Just e-mail or PM me if you have any questions.

    Thanks,

    ATM
    ShackMan
    wild_wire@yahoo.com
  20. Member Since
    May 2002
    Posts
    507
    Oct 13, 2003, 1:00 PM - Re: FettLights #20

    I too have had A set of these lights.For quite some time infact.They rule.Not to mention shackman is A cool dude to deal with.Buy these lights!!!!!!Well worth every penny.
  21. Member Since
    Apr 2002
    Posts
    215
    Oct 13, 2003, 1:18 PM - Re: FettLights #21

    Shawn, are you just pulling for gratitude from me as well? Guess no one wants to be left out. Thanks to you as well, for the compliments.

    The previous endorsements from your local TDH message board were non-solicited. The views expressed by those on our show do not necessarily reflect those of this station ...

    ATM
  22. Member Since
    May 2002
    Posts
    507
    Oct 13, 2003, 1:23 PM - Re: FettLights #22


    No!!!
    Not an endorsement!! Just telling the truth my freind...Your work speaks for its self.
  23. Lynn TXP 0369's Avatar
    Member Since
    Mar 2002
    Posts
    1,785
    Oct 13, 2003, 8:59 PM - Re: FettLights #23


    shackman wrote:

    Thanks for the endorsement, Jason.

    Lynn, yes, they're still available. Interest died-down after my last order of PC boards, so I have a few left. Just e-mail or PM me if you have any questions.

    Thanks,

    ATM
    ShackMan
    wild_wire@yahoo.com
    Thanks Shackman, I emailed RA last yesterday and he got in touch with me and he has one of yours to sell me.

    Lynn