BobaFettSlave1 Active Hunter Feb 1, 2005 #1 what are the colors of the wires on the esb gauntlets? they look like they go yellow red yellow/grey. what do you guy's think?
what are the colors of the wires on the esb gauntlets? they look like they go yellow red yellow/grey. what do you guy's think?
E2K13 Well-Known Hunter Feb 1, 2005 #3 Hmmmmm. I don't know but from the looks of this picture I am not seeing a black wire but it could just be me.
Hmmmmm. I don't know but from the looks of this picture I am not seeing a black wire but it could just be me.
BobaFettSlave1 Active Hunter Feb 1, 2005 #4 looking at the color simmalarity between the sholder bells and the top wire they look the same color dont they?
looking at the color simmalarity between the sholder bells and the top wire they look the same color dont they?
BobaFettSlave1 Active Hunter Feb 1, 2005 #5 by the way im doing this as we speek so any info you guy's can give me would help greatly.
BobaFettSlave1 Active Hunter Feb 1, 2005 #7 thats what it looks like to me so ima go with what you say.
Jango Fett Jr Well-Known Hunter Feb 1, 2005 #8 I see white, red, and grey/black, depending on lighting. I'd would say it's black since those are the colours that come in those big wires with three wires inside...don't know what they're called exactly. Anyone else know what I'm referring to?
I see white, red, and grey/black, depending on lighting. I'd would say it's black since those are the colours that come in those big wires with three wires inside...don't know what they're called exactly. Anyone else know what I'm referring to?
BobaFettSlave1 Active Hunter Feb 1, 2005 #11 a thought just crosed my mind. how thick are these wires?
DL44 Blaster Well-Known Hunter Feb 1, 2005 #12 I used 12ga. solid core for the top white wire. I used a black cord from an old VCR and wrapped it with red electrical tape for the middle "red" wire. I used the same black cord for the bottom black wire. The bottom two red/black looked fatter than the top most white wire to me so I used what I thought the prop makers might have had on hand Steve
I used 12ga. solid core for the top white wire. I used a black cord from an old VCR and wrapped it with red electrical tape for the middle "red" wire. I used the same black cord for the bottom black wire. The bottom two red/black looked fatter than the top most white wire to me so I used what I thought the prop makers might have had on hand Steve
BobaFettSlave1 Active Hunter Feb 1, 2005 #13 can you post a quick pick so i can see what it looks like?
DL44 Blaster Well-Known Hunter Feb 2, 2005 #14 http://forums.thedentedhelmet.com/attachment.php?attachmentid=433&stc=1 Note the location of the first white wires entry point....it's supposed to be about midway from the top corner. Most I have seen make it too high.
http://forums.thedentedhelmet.com/attachment.php?attachmentid=433&stc=1 Note the location of the first white wires entry point....it's supposed to be about midway from the top corner. Most I have seen make it too high.