ESB blaster started

  1. #1
    patiam69's Avatar
    Member Since
    Dec 2003
    From
    Sacramento, CA
    Posts
    424

    ESB blaster started

    well i got part of the kit i bought, it had a few seams and pinholes, but nothing a little glazing putty and sand paper could take care of, the other parts are on the way (barrel, Aluminum connector, barrel, scope mounts, molex connector and stock)so i wont do any priming till i have all the parts, this is total kit form (like a model) made of resin, but it is much cheaper than some others i saw (about $175 ish) so go ahead and call me cheap. pics never comeup for me so here is the link, maybe one of the mods can help me out
    I'll update the progress as i go




  2. #2
    cal196's Avatar
    Member Since
    Aug 2004
    From
    Earth
    Posts
    2,617

    Re: ESB blaster started

    Looks good, where did you get it? I would be set with just those parts and build around it from there. I dont have a blaster yet and no idea where to start.

  3. #3
    Bantha_PooDoo's Avatar
    Member Since
    Jun 2004
    From
    Flagstaff, AZ
    Posts
    160

    Re: ESB blaster started

    Just put [/image] on the end of that url and it should work.

    -Wes

  4. #4
    patiam69's Avatar
    Member Since
    Dec 2003
    From
    Sacramento, CA
    Posts
    424

    Re: ESB blaster started


    cal196 wrote:

    Looks good, where did you get it? I would be set with just those parts and build around it from there. I dont have a blaster yet and no idea where to start.
    pm me for the info cal

  5. #5
    patiam69's Avatar
    Member Since
    Dec 2003
    From
    Sacramento, CA
    Posts
    424

    Re: ESB blaster started

    Ok i got the rest of the kit, Im gonna work on it this weekend, last parts to get are a scope and the stock greeblies. not pictured is the V8 connecting rods and hand grips



    here is the barrel



    and these are pretty cool looking casts of molex's




    now the question is do i use a sink tube or cram my heiland into the end

  6. #6
    cal196's Avatar
    Member Since
    Aug 2004
    From
    Earth
    Posts
    2,617

    Re: ESB blaster started

    I am gonna try and make my own from the BB-Gun pvc pipe idea, I gutted the BB gun and took everything out so it cannot made to be fired even the trigger. Hardest part so far was melting the pvc around the chamber.

    That kit does look awesome but I dont think I can afford it right now. i will pm you after halloween because then I wont need it and I can buy it lol if that makes sense.

  7. #7
    patiam69's Avatar
    Member Since
    Dec 2003
    From
    Sacramento, CA
    Posts
    424

    Re: ESB blaster started

    well i am almost finished with this. the scope is a cheapy from wal-mart but it is crunch time for halloween so my quest for an accurate one will start after that. i still need to glue on the stock greeblies, tone down the sheen and dirty it up quite alot. what do you think???? im just holding the flash tube in for picture purposes.






  8. #8

    Re: ESB blaster started

    Great work there!

  9. #9
    Jango's kid's Avatar
    Member Since
    Nov 2002
    From
    SW Minnesota, very small town
    Posts
    2,517

    Re: ESB blaster started

    Lookin good.

  10. #10
    Tambo Fett's Avatar
    Member Since
    Mar 2003
    From
    Clarksville, TN
    Posts
    847

    Re: ESB blaster started

    Nice work, Doing one myself right now.

  11. #11
    sithlord23's Avatar
    Member Since
    Sep 2002
    From
    Kamino (also known as Seattle)
    Posts
    1,221

    Re: ESB blaster started

    Nice work, makes me want to do an ESB Fett myself. I love that blaster style

Similar Threads

  1. Started my Zam
    By Blue in forum Zam Wesell Costume
    Replies: 54
    Last Post: Sep 21, 2009, 8:39 AM
  2. I've started.
    By eon24 in forum Expanded Universe Bounty Hunters
    Replies: 37
    Last Post: Jun 11, 2008, 11:57 AM
  3. Jus started. Please help.
    By Burdy in forum Boba Fett Helmet
    Replies: 5
    Last Post: Nov 8, 2007, 5:25 PM
  4. How to get started.
    By marsan in forum Prop Building Workshop
    Replies: 10
    Last Post: Oct 29, 2006, 1:00 AM
  5. Getting Started...
    By Bobo in forum Boba Fett Helmet
    Replies: 5
    Last Post: Apr 1, 2003, 7:32 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •