ESB BLASTER DIMENSIONS...HELP!

As some of you might know, I have been working on a scratchbuilt blaster for a little while now, I had requested help on this before, and no one pulled through for me, so as I am nearing completion on my blaster, I am asking for some dimension references. I borrowed a pic from Sidewinder's awesome new run of blasters to use for an example ( I hope you don't mind buddy)
The questions are below the picture:



1) Size of scope eye piece.

2) Length of body of gun (barrel) Also length of flash tube, (not pictured)

3) Size of the space between scope and body.

4) Size of blocks that set on top of the scope mounts.

Thanks for all your help guys! I'm trying real hard to make this as accurate as possible.

G-Fett

length of the barrel is 7 5/8" (193mm)

Originally Posted by Seven

length of the barrel is 7 5/8" (193mm)

Thank you very much!

posted dims for the MR MPP flash here
http://www.thedentedhelmet.com/f20/mpp-measurements-templets-esb-blaster-3611/

Molex connector's (side boxes) measure...
see attached

Originally Posted by Seven

posted dims for the MR MPP flash here
http://www.thedentedhelmet.com/f20/mpp-measurements-templets-esb-blaster-3611/

Molex connector's (side boxes) measure...
see attached

Thanks alot Seven, appreciate the help!

G-Fett