Damage advise question

Dexx

New Hunter

• Feb 16, 2006

• #1

I have cut out my chest armour from a hard plastic bucket that I found in a local hardware store. I think it looks ok shape wise and am ready to start adding the damage to it.
My problem now is that having never done anything like this before I am unsure as to the best way to do this?
Could any one offer any advise that may help?
I’ll post a pic of it then you can all tell me if there is anything I can do to make it better/more accurate.

 

C

CenteroftheMind

Hunter

• Feb 16, 2006

• #2

For the dents, I used a dremel tool to get the basic shape and depth of the dent, then sanded the crap out of it to smooth it out and kind of bevel the edges, so it looks more like a dent than a hole.

 

mrgr8ness

Well-Known Hunter

• Feb 16, 2006

• #3

What I have been doing is using my dremel with the sanding drum and sanding a dent into it. Then I coat the inside of the dent with spot putty, let it dry, then sand out the dent by hand to make it smooth. I've been real happy with the results

 

B

Buckeye 01

Active Hunter

• Feb 16, 2006

• #4

For the blaster pock marks, you may try a blow dryer and the butt of a screwdriver. I haven't tried this, but I will here in a couple of days.

 

S

SarlaccBits

Active Hunter

• Feb 17, 2006

• #5

I was looking for the same information myself, I will be working this weekend on the damage and sanding of my armor…
Thanks so much!

 

Fett prop artist

Active Hunter

• Feb 17, 2006

• #6

I used a dremel without an attachment for my sintra armor. Worked well.

 

S

spikefett

New Hunter

• Feb 18, 2006

• #7

using a hairdryer and butt of a screwdriver is an ideal way of making realistic dents- I did this myself and it looks good! Also, you may want to sand the sharp edges from your armour to give it a worn look, and make it less angular.

 

V

vadersgiftedboy

New Hunter

• Mar 3, 2006

• #8

looks cool Good idea for making armor