Page 4 of 16 FirstFirst 12345678914 ... LastLast

BudgetFett No. 4 Interest Webley Scott Resin kit

  1. #76
    sithchick's Avatar
    Member Since
    Apr 2008
    From
    post Falls Idaho
    Posts
    77

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    I would like one as well as well as darts if your offering those too

  2. #77

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Put me down for one too if there is still room. Thanks!

  3. #78
    Seven's Avatar
    Member Since
    Aug 2002
    From
    Salem, Oregon
    Posts
    604

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    mrgr8ness said: View Post
    ...Out of curiousity, are you reinforcing the stock stock with anything?
    I am still pondering this one. But you're right, the bracket needs to be stong enough to hold the stock. When I made these several years ago the stock was heavier than the real wood stock ('cause solid resin will do that) and it put more of a strain on the light braket. It held, but it wasn't as sturdy as I would have liked. I have a few ideas on how to tackle this, and reinforcing it is one of them.

    However, anything I come up with would be an additional cost to me, and I don't have anything in the Budget for that. But what you could do, is sand down like 1/8" of the resin, and get a 1/8" thick alumimun plate and cut it out to shape and glue/screw it down and it would be a great way for added strength.
    Last edited by Seven; Mar 11, 2009 at 11:11 AM.

  4. #79

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    I would like to be signed up for this run.

    Thanks a lot

    Dan Stokes
    ddstokes@aol.com

  5. #80

    Member Since
    May 2003
    From
    uk
    Posts
    215

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Awesome, can you put me down for one please?

    your budget stuff rocks

  6. #81
    Light_Tech's Avatar
    Member Since
    Jun 2007
    From
    Mesa AZ
    Posts
    28

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    I'd love to get in on the run. Could I please be added to the list.

    Thanks,
    Chris

  7. #82

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    excelent post please put me in the list for one kit

    thank you

  8. #83

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Can we send payments yet? If so, what is your paypal address?

    Thanks a lot for doing this.

    -best

    Dan
    Last edited by Anakin Starkiller; Oct 11, 2008 at 12:40 PM.

  9. #84
    RangerChet's Avatar
    Member Since
    Jul 2008
    From
    Tomah, WI stationed at Fort McCoy
    Posts
    130

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Seven said: View Post
    I am still pondering this one. But you're right, the bracket needs to be stong enough to hold the stock. When I made these several years ago the stock was heavier than the real wood stock ('cause solid resin will do that) and it put more of a strain on the light braket. It held, but it wasn't as sturdy as I would have liked. I have a few ideas on how to tackle this, and reinforcing it is one of them.
    Have you thought about using a foam core to lessen the weight and casting resin around it? I have thought about it myself with one of my projects, but haven't worked with it to see how the resin works around it yet. Has anyone else tried this?

  10. #85
    sithchick's Avatar
    Member Since
    Apr 2008
    From
    post Falls Idaho
    Posts
    77

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    How about dropping a metal rod ( like hanger wire or somethin?) or two through the brace peice?

  11. #86
    Seven's Avatar
    Member Since
    Aug 2002
    From
    Salem, Oregon
    Posts
    604

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    RangerChet said: View Post
    Have you thought about using a foam core to lessen the weight and casting resin around it?
    I have seen it done before in an R2-D2 kit that I bought several years ago. They had used Styrofoam in the center of the leg to make it lighter and to use less resin. I was wondering if it would work in a pressure pot though. So far, the only issue is that it floats and wont stay in the middle. So I get like a side or the top that isn't covered with resin and the styrofoam is sticking out.

    Quick update:

    resin did arrive tues. I have casted a few of the smaller parts, havn't tackled the larger items yet. I have the barrel in the pot as I type. Once it is ready to demold I will pull that baby out.

    hopefully I should have my first Webley test done by the end of this weekend.
    Last edited by Seven; Mar 11, 2009 at 11:13 AM.

  12. #87
    Chucko's Avatar
    Member Since
    Sep 2008
    From
    Temecula, CA
    Posts
    482

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    I can't wait.

  13. #88

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    How did I miss this? Heck yeah! If no one has claimed it yet throw me into that last spot. Just lemme know what else I need to do.

  14. #89

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    I'd like to be added also, my son would love one of these.

  15. #90
    Account Deactivated
    Member Since
    Sep 2006
    From
    Spain
    Posts
    1,712

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Please, can you change me from the 1st run list to the 2nd run?

    Thank you very much!

  16. #91
    formerly old_jedi_mind_trick Bobby Fett UK's Avatar
    Member Since
    Nov 2007
    From
    Manchester, England
    Posts
    1,453

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Yes, I made list one!

  17. #92
    mrbungle's Avatar
    Member Since
    Oct 2008
    From
    ALABAMA!!!!!
    Posts
    568

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    i missed out on the runs !!!! arggghhh!!!

  18. #93
    Seven's Avatar
    Member Since
    Aug 2002
    From
    Salem, Oregon
    Posts
    604

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    List is closed, sorry no longer adding any more to the list.

    Another quick resin update:

    The molds seem to be working so far, and I got a few parts tested. I am however disappointed with the resin itself. It seems to be fine for the thicker parts, but for the thinner ones, it is far to brittle. The littlest pressure and it snaps. So that's no good.


    So I'll use it up for the heavier thicker items, but will need to order different resin for the smaller thinner parts. I am going to get Smooth-cast 321.

    Anyone recommend another type of resin?
    Last edited by Seven; Oct 13, 2008 at 10:22 PM.

  19. #94
    Seven's Avatar
    Member Since
    Aug 2002
    From
    Salem, Oregon
    Posts
    604

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    just a teaser pic


    I have tried to cast two barrels already and I have concluded that I will have to make a new mold for it. I will also try to make a second mold of each part to help speed things up a bit.

  20. #95
    Light_Tech's Avatar
    Member Since
    Jun 2007
    From
    Mesa AZ
    Posts
    28

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Amazing, just can't find the words.

    -Chris

  21. #96
    Skupilkinson's Avatar
    Member Since
    Jan 2007
    From
    Wales, UK
    Posts
    1,397

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Fantastic! Looks amazing! Can't wait to get mine.

  22. #97
    Murphoid's Avatar
    Member Since
    Dec 2007
    From
    North Carolina
    Posts
    341

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Looking great!

  23. #98
    formerly old_jedi_mind_trick Bobby Fett UK's Avatar
    Member Since
    Nov 2007
    From
    Manchester, England
    Posts
    1,453

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Looking great!

  24. #99
    stellardude's Avatar
    Member Since
    Oct 2007
    From
    Ottawa, Ontario Canada
    Posts
    192

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Beauty!

  25. #100

    Re: BudgetFett No. 4 Interest Welbey Scott Resin kit

    Sweet!

Similar Threads

  1. Budgetfett Webley Scott TLC Kit
    By Firespray in forum Boba Fett Costume
    Replies: 17
    Last Post: Apr 24, 2009, 12:17 AM
  2. INTEREST? RESIN casts of Webley Flare gun?
    By E.D.C. Studios in forum Boba Fett Costume
    Replies: 24
    Last Post: Dec 7, 2008, 12:14 PM
  3. Genuine Webley & Scott 1916 flare gun
    By dung0beetle in forum Boba Fett Costume
    Replies: 21
    Last Post: Sep 21, 2007, 10:51 AM
  4. Webley & Scott Mk1 No1 Information??
    By steveday72 in forum Boba Fett Costume
    Replies: 13
    Last Post: Feb 13, 2003, 1:44 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •