Page 3 of 3 FirstFirst 123

Boba and Jango Packs

  1. #51
    TLobe00's Avatar
    Member Since
    Sep 2008
    From
    OH
    Posts
    826

    Re: Boba and Jango Packs

    how many sheets of letter does this use?

    Thanks,
    Tony

  2. #52
    ruze789's Avatar
    Member Since
    Apr 2008
    From
    New Hampshire
    Posts
    32

    Re: Boba and Jango Packs

    38 sheets of letter paper.
    It comes to somewhere around 25 square feet, you'd need roughly 3 32"x40" sheets.

  3. #53
    TLobe00's Avatar
    Member Since
    Sep 2008
    From
    OH
    Posts
    826

    Re: Boba and Jango Packs

    That's not too bad

  4. #54
    Skupilkinson's Avatar
    Member Since
    Jan 2007
    From
    Wales, UK
    Posts
    1,397

    Re: Boba and Jango Packs

    Thanks Ruze, I couldn't remember off the top of my head and I'm a little busy here.

  5. #55
    TJDFett's Avatar
    Member Since
    Jul 2008
    From
    North Carolina
    Posts
    314

    Re: Boba and Jango Packs

    Nice work so far!

  6. #56
    Fractal-Fett's Avatar
    Member Since
    Jul 2009
    From
    San Diego, CA
    Posts
    493

    Re: Boba and Jango Packs

    Looks Great, can't wait to start the Classic pack, already used your jango jet pack with moderate success.

    If it's ok with you, I'll post some pics.

  7. #57
    Skupilkinson's Avatar
    Member Since
    Jan 2007
    From
    Wales, UK
    Posts
    1,397

    Re: Boba and Jango Packs

    Sure thing mate.

  8. #58
    Fractal-Fett's Avatar
    Member Since
    Jul 2009
    From
    San Diego, CA
    Posts
    493

    Re: Boba and Jango Packs

    Here we go, It is EXTREMELY rough, I rushed it, I had a troop later that day, so It looks like junk.


    Also, the cone looked a bit "all-consuming" so I went with some household items, which I am eventually going to replace.
    Attached Thumbnails Attached Thumbnails photo-30-jpg   photo-31-jpg   photo-32-jpg  

    photo-33-jpg   photo-34-jpg  

  9. #59
    Skupilkinson's Avatar
    Member Since
    Jan 2007
    From
    Wales, UK
    Posts
    1,397

    Re: Boba and Jango Packs

    It doesn't look that bad mate. Though rushing will kill any good build. Still, look on the bright side, you can learn from it and start over. Or put some time into fixing it?

  10. #60
    Fractal-Fett's Avatar
    Member Since
    Jul 2009
    From
    San Diego, CA
    Posts
    493

    Re: Boba and Jango Packs

    Probably just going to start on a new jet pack build, "Classic" is my guess.

    Thx 4 the kind words though.

  11. #61

    Re: Boba and Jango Packs

    How did you get that middle piece in if its not even atached to any of the paper? Sorry if I get anoying. I'm a man with alot of questions.

  12. #62

    Re: Boba and Jango Packs

    What do the letters do?

  13. #63

    Re: Boba and Jango Packs

    Wow. I am really stupid. I am very sorry. This happends sometimes when I get lazy and dont really look around.

  14. #64
    aprilstorm's Avatar
    Member Since
    Mar 2010
    From
    Melbourne AU
    Posts
    72

    Re: Boba and Jango Packs

    Im thinking of using this template to build a jetpack for my son's mandalorian costume Im working on (he is almost adult size). So, just a silly question perhaps, what level of thickness card (GSM) should I be printing this on? Also is there any technique for strengthening it once its done, like perhaps fiberglass?

    thanks

    April

  15. #65

    Re: Boba and Jango Packs

    Guys just wondering did Skip ever do the pdf of the boba pack?
    If he did can you point me in the right deriction?

    Thanks,
    Darth

  16. #66
    Triple-d's Avatar
    Member Since
    Dec 2010
    From
    Roanoke, VA USA
    Posts
    400

    Re: Boba and Jango Packs

    Hey TDH! Ok. Finally I found a place where I can contribute (in some fashion!). As some of you know I am in the process of building a Jango Fett costume for my son. One of the areas that I have been scratching my head on is the Jetpack. I found this thread here and downloaded the Pepakura software that Skupilkinson talks about and WOW. So. I figured I would save each page as its own PDF so then you can scale it to the size you need. So here are both packs (Jango Areana and Boba Jetpack) in Letter not A4. I would still recommend you download the Pepakura software and the files that Skupilkinson developed. This way you know where each piece goes (there are alot). Skupilkinson did a great job and I hope that my contribution will help some one else.

    Jango Arena Jetpack PDF's (Letter Size)
    JangoArenaJetpackLetterPDF.zip

    Boba / Jango Classic Jetpack PDF's (Letter Size)
    BFClassicJetpackLetterPDF.zip

  17. #67
    spotter301's Avatar
    Member Since
    Nov 2013
    From
    Hillingdon, Slough, United Kingdom, United Kingdom
    Posts
    111

    Re: Boba and Jango Packs

    this is brilliant,just what I needed

  18. #68
    spotter301's Avatar
    Member Since
    Nov 2013
    From
    Hillingdon, Slough, United Kingdom, United Kingdom
    Posts
    111

    Re: Boba and Jango Packs

    ok downloaded the templates. new to this bit so bear with me..........when I print them off onto a4 is that the actual size or do I have to manipulate them? and whats best to print them onto?

  19. #69
    Gray's Avatar
    Member Since
    Nov 2013
    From
    Cape Cod, Mass, U.S.
    Posts
    22

    Re: Boba and Jango Packs

    spotter301 go and buy some Cardstock from your local office store (Staples, probably). It's thick, and its easier to work with than paper. But they still will run through a normal printer, so don't worry. Oh and I would use some Loctite superglue or any other superglue to speed up the process a bit. You shouldn't have to manipulate them as long as the paper is also A4 sized. If not then just use the Letter size instead.

  20. #70
    spotter301's Avatar
    Member Since
    Nov 2013
    From
    Hillingdon, Slough, United Kingdom, United Kingdom
    Posts
    111

    Re: Boba and Jango Packs

    thanks gray, unfortunately I lost patience and money and ordered one!

  21. #71
    Gray's Avatar
    Member Since
    Nov 2013
    From
    Cape Cod, Mass, U.S.
    Posts
    22

    Re: Boba and Jango Packs

    Oh don't worry, I think I'm headed in that direction too. Papercraft is quite a *****. Who'd you go with?

Similar Threads

  1. jet packs
    By td 2266 in forum Jango Fett Costume
    Replies: 11
    Last Post: Jan 26, 2009, 11:58 PM
  2. Who is making jet packs right now?
    By xfettx in forum Boba Fett Costume
    Replies: 4
    Last Post: Jan 24, 2009, 7:17 PM
  3. Custom packs?
    By Drkmandalorian in forum Expanded Universe Bounty Hunters
    Replies: 6
    Last Post: May 14, 2006, 10:33 PM
  4. Anyone ever deal with these packs???
    By womo68 in forum Boba Fett Costume
    Replies: 8
    Last Post: Dec 29, 2005, 3:50 PM
  5. Jet Packs In The UK???
    By VADER-FETT in forum Boba Fett Costume
    Replies: 7
    Last Post: Mar 20, 2005, 2:31 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •