backplate tutorial??

  1. #1
    RBF's Avatar
    Member Since
    Jan 2005
    From
    Same planet as you, in a country that is below sea-level... the Nether-realm.. Oh wait.. Netherlands
    Posts
    2,173

    back plate tutorial??

    ok... I've just made another sad attempt at a backplate... it's not finished yet, but it's not going to work...

    so... without fiberglas, vac forming or even sentra, pvc sheets to work with... any one has a tutorial on how to get the right 3 million curves in the backplate??
    (its not that im to lazy to get teh materials, it's just not available here... "order through the internet." no I don't have acces to a creditcard either....)

    theres not alot of fun in this project anymore...
    Last edited by RBF; Aug 12, 2005 at 8:51 AM.

  2. #2
    judge_hellfast's Avatar
    Member Since
    May 2005
    Posts
    51

    Re: backplate tutorial??

    Don't let the little things get you down. I know it can be very frustrating at times.....seems to be a lot of frustration when it comes to building a Mando.

    Anyhow, have you tried a junk yard? There is a lot of materials in a junk yard that could be utilized. The good thing is that most towns have a junk or dump yard of some kind. Some materials that could be found, for instance, are shower stalls. Some shower stalls are made with PVC plastic. There are several other items you might find as well. Shower stalls are just an example. Keep your head up. Things will work out for you.

  3. #3
    Gator Fett's Avatar
    Member Since
    Apr 2002
    From
    Clarkston, Michigan
    Posts
    805

    Re: backplate tutorial??

    I can't realy help you with the "plastics" or fiberglass, but here is my tutorial for working with aluminum.

    http://www.thedentedhelmet.com/showthread.php?t=6251

    If aluminum is not an option you can always try sheet metal, a pair of snips, a rubber mallet and regular hammer. Be sure to sand the sharp edges.

    I wish I could help you more bud. Don't give up hope. Put it aside for a day or so and come back fresh.

    Gator
    Last edited by Gator Fett; Aug 11, 2005 at 3:17 PM. Reason: spelling

  4. #4
    RBF's Avatar
    Member Since
    Jan 2005
    From
    Same planet as you, in a country that is below sea-level... the Nether-realm.. Oh wait.. Netherlands
    Posts
    2,173

    Re: backplate tutorial??

    thnx guys!!


    that tutorial might be helpful...

    hmm... maybe my other neighbour could get me few of those sheets ona conciderable discount...

    il post progress pics as I go...

  5. #5
    FrankFett's Avatar
    Member Since
    Jun 2005
    From
    St. Louis, Missouri
    Posts
    182

    Re: backplate tutorial??

    I would hate to see you give up dude! You have been one of my inspirations from the start!

    Frank

  6. #6
    cal196's Avatar
    Member Since
    Aug 2004
    From
    Earth
    Posts
    2,617

    Re: backplate tutorial??

    I tried my hand nad crafting a backplate, and it never fit my back right no matter what I did. I finally realized sintra is like trying to bend paper, it does not conform to your shape, you have to actually cut it into peices and reform it then bondo bondo bondo. I gave up and bought one.

  7. #7
    RBF's Avatar
    Member Since
    Jan 2005
    From
    Same planet as you, in a country that is below sea-level... the Nether-realm.. Oh wait.. Netherlands
    Posts
    2,173

    Re: backplate tutorial??

    yeah that sounds right on Cal... my old one is also a 2 piece construction, just never really does it for me.

    and I think I'll have to buy one aswell... but... that's the creditcard buisness...


    wow!! FrankFett... you make me feel all strange and stuff!! no-ones ever said that to me thnx dude!!

  8. #8
    RBF's Avatar
    Member Since
    Jan 2005
    From
    Same planet as you, in a country that is below sea-level... the Nether-realm.. Oh wait.. Netherlands
    Posts
    2,173

    think I just did it...

    ow my...

    I think I just made a backplate... out of a trash can...

    the incissions were necessary to get rid of the plate that was sticking out much, it holds itself together very well, but just to be on the safe side I inserted 2 bolts...

    the old plate is the crappy aluminium one... not like what gator suggested, that looks awesome, but just the cutable very.... very thin and sharp stuff...

    the big hole in the middle was necessary aswel, now the jet pack wont make it flip away from my neck when it hangs on my back.
    You don't see much of it anyway so...

    now its just a matter of cutting, sanding, bondoing etc...

    and make it fit to my collar, wich I am going to create next...
    Attached Thumbnails Attached Thumbnails old-plate-jpg   old-plate-2-jpg   old-plate-3-jpg  

    new-plate-jpg   new-plate-2-jpg   future-jpg  

    Last edited by RBF; Aug 12, 2005 at 8:52 AM.

  9. #9
    FrankFett's Avatar
    Member Since
    Jun 2005
    From
    St. Louis, Missouri
    Posts
    182

    Re: backplate tutorial??

    See, don't ever give up, that looks pretty good!!!

    Frank

  10. #10
    RBF's Avatar
    Member Since
    Jan 2005
    From
    Same planet as you, in a country that is below sea-level... the Nether-realm.. Oh wait.. Netherlands
    Posts
    2,173

    Re: backplate tutorial??

    thnx Frank!! thnx guys!!! TDH lifts the spirit again!!!

    done the collar out of plexiglas, the back is trash can.

    they actually fit me pretty good, since I bend them both to fit me.. don't know if it looks strange or wrong, but that might be a result of my thinner than 2 thin body posture...

    sorry for the blurry quick pix, but it's late here so...
    Attached Thumbnails Attached Thumbnails back-collar-jpg   back-collar-2-jpg   back-collar-3-jpg  


  11. #11
    psberetta's Avatar
    Member Since
    Mar 2005
    From
    Iowa
    Posts
    751

    Re: backplate tutorial??

    Looks good to me, nice shoulder studs also

  12. #12

    Member Since
    Jul 2005
    Posts
    590

    Re: backplate tutorial??

    Is the back plate from the same trash can that you made the cod piece from?


    It looks good... Told ya. You got the skills.

    Brian

  13. #13
    RBF's Avatar
    Member Since
    Jan 2005
    From
    Same planet as you, in a country that is below sea-level... the Nether-realm.. Oh wait.. Netherlands
    Posts
    2,173

    Re: backplate tutorial??

    thnx 8)

    yeah it's the same trash can, but ofcourse not from the dome section, but from the "can" itself.

    it's not very thick so it's easily bend.

    thnx again

  14. #14
    Christo Fett's Avatar
    Member Since
    May 2005
    From
    New England
    Posts
    250

    Re: backplate tutorial??

    WOW!
    The backplate has to be the hardest piece to make yourself. Yours is turning out great. Thanks for posting pics so we can all see WHERE you made the cuts to make the thing take shape better. This is the first place I've seen evidence of a plastic backplate that is scratchbuilt and looks like it'll fit the back properly.

    Anytime there is a thread like this, asking for backplate help it usually ends up with a "give up and buy one" answer. No offense to anyone who's said that, because that is how I've felt too. R_boba_fett just showed us it can be done.........


    .......and with a trash can!


  15. #15
    Jaiden's Avatar
    Member Since
    Apr 2005
    From
    Titusville, FL
    Posts
    578

    Re: backplate tutorial??

    You are absolutely right Christo. That's the way I felt for a while. But then again, the $1700+ thqt mando sets are going for on eBay kinda turned me back to the "wait and show patience" idea.

    R_boba_fett, thanks for showing us that even when you don't have the same access to material that we do here in the US, you can still make a killer set.

    Keep up the good work!

  16. #16
    RBF's Avatar
    Member Since
    Jan 2005
    From
    Same planet as you, in a country that is below sea-level... the Nether-realm.. Oh wait.. Netherlands
    Posts
    2,173

    Re: backplate tutorial??

    whohow!!


    thank you so so so so much!!

    those are by far some of the best comments I have ever had!!

    I'll post more as I go if you're interested look for my threads, I can now make another "ESB to ROTJ ***** coversion..." this time with "armor" at teh stars!!

Similar Threads

  1. Backplate?
    By Durge in forum Jango Fett Costume
    Replies: 10
    Last Post: May 23, 2005, 7:19 PM
  2. Backplate
    By mobius in forum Boba Fett Costume
    Replies: 3
    Last Post: Nov 24, 2003, 7:44 AM
  3. Backplate help
    By Slowmo in forum Boba Fett Costume
    Replies: 6
    Last Post: Oct 13, 2003, 9:19 AM
  4. Would a tutorial w/pics actually help?-Added vest tutorial
    By LisaFett in forum Boba Fett Costume
    Replies: 20
    Last Post: Oct 31, 2002, 9:27 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •