Anti-Security Blade - Part Identification?

batninja

Well-Known Hunter
I'm starting my shin tools with the original Paterson parts, but I'm having trouble identifying the two metal pieces on the anti-security blade. I've searched the forum but couldn't find a definitive answer. Is this a found item? Any ideas? With the holes, they look like weird Cotter pins....

And no, they're not X-Acto knife handles, so don't even go there. :)

blade.gif
 
I've spent hours searching through Cotter pins... and haven't come up with anything, but I still think that's what they are.
 
Jon, I'm with you. I've searched through Machine Pins, Clevis Pins, Cotter Pins, Spring Pins, Spirol Pins, Roll Pins, Dowel Pins, Taper Pins, Alignment Pins, Self-Clinching Pins, Grooved Pins, Straight Pins.

I found this under 'knurled pins'. Are we getting closer?

diagram_gpinsKnurl.jpg


If we can't find the actual piece, I wonder if this is something can can be (*ahem, psberetta) machined? :)
 
Okay, now I'm obsessed...

By removing the blade retainer from a #10 X-Acto knife, I was able to make this:

DSC01241.gif


If I add the 'Cotter' holes with a drill press, I figure this is a close match. Now 'm looking for knives without the groove.

What do you think?
 
That looks close.
I can't find where I saw this now but I think I remember seeing someone suggest that these parts might be a soapstone holder(soapstone is sorta like chalk but harder). Similar to a chalk holder but smaller.

I found this while looking for soapstone holders http://www.thegangbox.com/pc-393-49-round-soapstone-holder.aspx and this http://www.homedepot.com/prel80/HDUS/EN_US/jsearch/product.jsp?pn=100341093 While not the screen used part these do look like they could be modified to look very close.
Mark
 
Last edited by a moderator:
I got them at Hobbytown. I can't remember who the maker was (maybe Excel) but I'm sure they still have them. The name of them was just "probe". Look around in the aisle where they have all the xacto knives and accessories and you should spot them readily enough.

If I make it into Hobbytown anytime soon I'll make sure and look for the manufacturer's name.

The packaging was red and white if that helps any...(y)
 
That rocks. Thanks for the info. And what do you know, there's a HobbyTown within walking distance to my apartment! :)
 
ok guys, hear me out on this. i was doing some research on different pins and accessories and from what i've found, a lot of things are close...or have certain qualities of the original, but fail to meet all three signs: the diamond knurls, the holes, the size (yes, i've seen some things that look dead on that are print press parts but are the size of highlighters :/ )

anyways, i've been just googling things and going between sites and it looks like gun parts might have something to do with the original part (and we all know lucas used lots of vintage guns to convert props.


most importantly sight adjustment tools


These parts are for the AR15 and M16, the AR15 was designed in 1958 and in service starting in 1963 (and still now). The M16 was designed in 1957 and put into service in 1960 (and again still used now)
here is the site and the pictures are below.
http://www.gunaccessories.com/AR15-M16Parts/SightToolsPinsAccess.asp

not saying this is what i think it is, i'm just saying here is another branch of research if people are up for it

i'd also like to add, in regards to the two bottom parts, if the part on the left was cut so the non-knurled end was trimmed, and just the end of the part on the right was cut off, they could be bonded, and the bond could be hidden with tape. then the part would only be missing two holes. towards the knurled end. or maybe there is a similar part i should be looking for

BT-KNS16.jpg


TL-A1.jpg


TL-A2.jpg


TL-A3.jpg
 
Last edited by a moderator:
While that is an interesting concept, I personally don’t think they could be site adjustment tools. I’ve worked on and handled a great assortment of vintage and modern military firearms (a friend of mine was a class 3 dealer and class 2 manufacture) and have never seen a site tool that looked like this. Also the pins on the shin tool and raw metal, with no indication that they ever had a blued finish. Considering that the pins haven’t rusted, it would lead me to believe they are stainless or some form of alloy.

I’m still thinking they have to be some sort of cotter pin. Just the general size/ length. The lower holes on the pin (opposite the knurled end) appear to be beveled, like something would be inserted in and out of these holes and a regular basis, much like a cotter pin.

Anyway, I’m just thinking out loud here…:facepalm
 
Last edited by a moderator:
This thread is more than 17 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top